Is the Profile that you require not listed?
See our alternative recommendations »
 
 
   
These media profiles have "Roland Intelligent Pass Control."
To activate Roland Intelligent Pass Control, the printer's firmware version 3.00 (and above) and Roland VersaWorks 3.11 (and above) are required.

 

   
Printer Roland VersaCamm VP300
   
- Roland Intelligent Pass Control
  Inks Roland EcoSol - MAX
  RIP Roland VersaWorks v3+
  Metamark MD5
High Performance Calendered		 MD5-100 White Gloss Click the above to download all of these profiles

[31.5mb]
MD5-101 White Matt
Metamark MD3
Intermediate Grade Calendered 		MD3-200 White Gloss
MD3-301 White Matt
  Metamark MD7
Cast Vehicle Wrap 		MD7-100 White Gloss
 
Display
 MD-PP220 Poster Paper
 
Backlit
 MD-BL2 Backlit Polyester
     
 
To Install
 
 
  1. Click the download icon.
  2. Unzip the file
  3. Save these files to c:/program files / Roland Versa Works / Profiles / <select your printer > / Eco Sol Max
  4. Go into Versaworks to Media / Media Explorer / Load from File (icon) and select the above directory.
  5. Click Ok, then Ok to confirm, and repeat for each profile available.
  6. The profiles are then available to use in the < Quality > tab.

    » Click here for further info [pdf]