Notes
   
1. Generic Profiles
These profiles are already installed on your Roland VersaWorks or ColoRip software. They may have a slightly different name to that shown on the list here. They are designed to work on a range of products. Such profiles are Generic II, GPPM, SP-M, etc.
 

2. Roland Profiles
Many Metamark products will give very good results on a profile for a similar product by an alternative manufacturer. Roland offers a very wide range of profiles so visit www.rolanddg.com to download.

 
3. Metamark MD5 Profile
You may start by trailing the product using the Metamark MD5 profile. Metamark profiles are high quality and each one is fully developed and tested. As such the Metamark MD5-100 profile is normally an excellent place to start on many products if we don't have the right profile.
 
4. 'Overprint' function
To achieve good colour vibrancy on Backlit and transparent products, there is a function in the Roland RIP to do an overprint. Go to Print Settings / select Custom and select Overprint 2
 
5. 'Colour Management'
In the Roland RIP the Colour Management is normally set to 'Pre Press Europe'. Selecting 'Max Impact', or 'Sign and Display', will give punchier colours, on any given profile.
 
5. Achieving the right colours
If you are printing an image and not achieving the desired colours, it is worth trialing a few different profiles to see which gives the best results, also see note 4.



For all these suggestions it is important to test a sample first.

 

Alternative ICC Colour Profiles - Roland Printers / Roland VersaWorks RIP
  When a specific ICC Colour Profile is not available, the following alternative profiles can give very good results. For all these it is important to always test a sample first.
 
Code Alternative Profiles Notes
   
Vehicle and Outdoor  
MD5-100 -
MD5A MD5-100  
MD5-101M / MD5-105 MD5-100  
MD5-B MD5-100  
MD7 MD5-100 This product works best with low ink limits
MD3-200 Generic Vinyl II See Note 1. Pre Installed
MD3A MD3-200  
MD3-301M / MD3-205 MD3-200  
MD3-B MD3-200  
MD3-R MD3-200  
MD-P MD3-200  
MDP-H MD3-200  
MDE MD3-200  
MD-BW Generic II See Note 1. Pre Installed
  Ri-Jet100 See note 2. Download from www.rolanddg.com
     
Label and Speciality  
MD-BS / MD-BG SP-CLT See Note 1. Pre Installed
MD-SBS / MD-SBG SP-CLT See Note 1. Pre Installed
MD-RF MD5-100  
     
Banner    
MD-FL440 Generic Banner II See Note 1. Pre Installed
MD-FL500 Generic Banner II See Note 1. Pre Installed
MD-FL510 Generic Banner II See Note 1. Pre Installed
MD-FL550 Generic Banner II See Note 1. Pre Installed
MD-FLB2 Generic Banner II See Note 1. Pre Installed
     
Window Graphics    
MD-CV2 MD5-100 See Note 5. Select 'Max Impact' in Colour Manag.
MD-CV MD5-100 See Note 5. Select 'Max Impact' in Colour Manag.
MD-CR MD7-100 See Note 4. Select Overprint
MD-SC Generic Vinyl II See Note 1. Pre Installed
MD-WF MD3-200  
     
Backlit    
MD-BL2 MD5-100 See Note 4. Select Overprint
MD-T MD5-100 See Note 4. Select Overprint only if required
MD-BB Generic Vinyl I See Note 1. Pre Installed
     
Textile and Canvas    
MD-AC370 Generic II See Note 1. Pre Installed
MD-AC2 Generic II See Note 1. Pre Installed
MD-TF2 MD7-100  
MD-TB MD5-100  
MD-TD MD5-100 See Note 5. Select 'Max Impact' in Colour Manag.
MD-MX MD5-100  
MD-TX Generic II See Note 1. Pre Installed
     
Promotional and Display    
MD-PP150 GPPM Photo Matt See Note 1. Pre Installed
MD-PP210 Sihl 3654 / GPPG See Note 2. / See Note 1.
MD-PP220 GPPM Photo Matt See Note 1. Pre Installed
MD-RU160 SP-M See Note 1. Pre Installed
MD-RU170 SP-M See Note 1. Pre Installed
MD-PU SP-M See Note 1. Pre Installed
MD-FG MD5-100 / Gen. Vinyl I See Note 1. Pre Installed